UPS Power DSP 10-200KVA:
1. Can be parallel max 8pcs charger
2. N+X Modular ups system
3. Internal audio alarm system
DSP series 10K-200KVA:
1. Pure sine wave output, true on-line dual conversion design
2. Adopt 4 layer PCB, and SMD technology.
3. The sixth generation IGBT, the inverter has high efficiency, low
temperature, high reliability.
4. Touch screen display, with the simple operation and Intuitive
data, optional display language and logo.
5. Set the work mode on the display directly, UPS mode, ECO mode,
EPS mode.
Intelligent detecting function
6. Excellent load feature, it is completely capable to load from
0-100% while no need to change to bypass
7. Three phase separately control, realizes the control of
instantaneous over-loading balance, so as to reach 100% unbalanced
load.
8. Cold start
9. Generator compatible
10. RS232 and RS485 standard collocation, optional SNMP and dry
contact
11. Perfect protection.
12. Selectable battery inspection module
13. High-powered dynamic feature
14. Optional input harmonic filter
15.http://www.baykeepower.cn, http://en.baykee.net
Model | DSP10K | DSP20K | DSP30K | DSP40K | DSP60K | DSP80K | DSP100K | DSP200K |
Nominal capacity KVA | 10KVA | 20KVA | 30KVA | 40KVA | 60KVA | 80KVA | 100KVA | 200KVA |
Work mode | parallel max 8pcs the same model |
Phase | 3phase+N+G |
Input power factor | >0.9 or >0.95(optiom) |
Rectifier | Nominal input voltage | 220/380VAC ;230/400VAC ; 240/415VAC |
Range | +/-25% |
Nominal input frequency | 50Hz+/-10% ; 60Hz+/-10% |
Output ripple | Less than 2% |
Soft start | 0-100% 5sec |
Charge | Charge mode | constant current to constant voltage, with temp compensation; with
Auto change |
Float Voltage | 432VDC |
Boost Voltage | 445VDC |
Temperature compensation voltage | 3mV/ 1 pcs |
Charge current | 0.1C( automatically change follow the batteries ) |
Charge frequency | 20% of Rated capacity |
Battery | Battery Type | maintenance-free lead acid battery |
Battery capacity | 7--999AH settable (according to the capacity) |
Battery number | 32pcs 12V or 192pcs 2V(Nominal voltage 384VDC) |
Inverter | Phase | Three phase+N |
Capacity | Rated capacity *0.8 |
Nominal voltage | 220/380VAC ; 230/400VAC ; 240/415VAC |
Output voltage stability | +/-1%( Stable load); +/-3%( fluctuant load) |
Output frequency stability | 50Hz/60Hz＜+/-0. 5% |
Creast factor | > 3:1 |
Output waveform distortion | Sine wave , linear load<3%;non-linear load<5% |
Dynamic characteristics | Instant voltage<+/-5%(from 0 to100% ), Instant recover time<10mS |
Unbalanced load voltage | ＜+/-5% |
Overload Protection | 105% 10 m；125%1S；150％ 10 ms |
efficiency | >95％(full load) |
Bypass | Phase | Three phase +N |
Nominal voltage | 220/380VAC ;230/400VAC ; 240/415VAC |
Transfer time | <1mS( static switch with 0 transfer time ) |
Protection | Input protection | Input voltage/frequency over limited ;wrong phase; lack phase |
Output protection | Over current short circuit ; factor low protection |
Battery protection | Over charge ; over-discharge protection |
Temperature protection | Ambient over temperature protection; inverter over temperature protection |
Hardware failure protection | Assistant power abnormal, breaker cut off , breaker overload, power
components over current/over voltage etc protection |
System Parameters | Working environment | Temp: 0～40, relative humidity 30%～90 %;(a 1% decrease against 100
meters’ rise. Altitude 4000m MAX) |
cooling -down method | COMPULSIVE VENTILATION(with temperature control) |
Communication Interface | RS232, RS485; optional SNMP card (for internet long distance
monitor ) |
Redundancy function | In series or N+1 parallel |
Anti-surge capacity | 10/700μS, 5KV ；8/20μS, 20KA |
Protection level | IP21 or IP31 |
Safety Performance | Vin-n Vout-n 3000Vac, creepage<3.5mA isolation resistance
>3M(500VDC) |
